Based on long years of experience in the development of modules, UES offers a broad spectrum for all areas of use. Even viscous glue types or PUR adhesives are processed reliably with modules from UES.
UES Modules are connection-compatible with all leading suppliers.
H300 Modules - for Dot-/Beadapplication
The UES high precision module H300 is well suited for standard application of glue at normal application speed. The module processes glue with a viscosity up to 20,000mPas/s at a maximum switching speed of 4,000p/min (depends on the triggering).
For fast openings air pressure is applied to the module .
The H300 module is ideal for standard dot-/beadapplication
- Inspection orifice (central orifice) for identification of seal wear
- High-tech materials with the highest surface quality
- High-quality brass module body with robust coating
- Special seals and packings for the highest durability with maximum sealing effect and minimum wear
- Broad range of sealing technologies with the highest levels of reliability and precision
- Reduced needle lifting for exceptional glue hairline tear-off
- Adjustable spring lift for the UES H300 module series with spring seal
H300 needle seat (NA)
Needle seat modules are optimized to reduce nozzle blockage caused by contaminated glue. The peak of the needle pushes every pulse through the outlet whereby a blockage of the nozzle is nearly impossible. Because the nozzle has no capillary unwanted drop-out is avoided. The integrated fine adjustment provides for a precise application.
More Information
Catalogue
H340 air/air
H340 modules are especially designed for air opening/ air closing glue applicators.
Based on the design, thread tear-off is reduced to an absolute minimum. The module works precise even at very short trigger pulses and provides high repetition accuracy.
More Information
Catalogue
Multifit Modules - for Dot-/Beadapplication
- Additional universal connection options using:
- Adaption surface at the rear for Nordson®Solid Blue guns
- Adaption surface for ITW®/DynaBF micro
- Screw guides for Robatech® guns
- Can be used in a variety of applications as a compatible and reliable replacement part
- Functionally identical to the H300, H340 and H3000 modules
- Use of high-quality materials for all components
- Fits into any production facility
- Cost savings through improved performance
- Available “just-in-time” worldwide
H300 standard
The UES high precision module H300 is well suited for standard application of glue at normal application speed. The module processes glue with a viscosity up to 20,000mPas/s at a maximum switching speed of 4,000p/min (depends on the triggering).
For fast openings air pressure is applied to the module.
The module is best for standard dot or bead applications.
H340 air/air
H340 modules are especially designed for air opening/ air closing glue applicators. Based on the design, thread tear-off is reduced to an absolute minimum. The module works precise even at very short trigger pulses and provides high repetition accuracy.
- High repeat accuracy with very short actuation times
- Developed for air opening/air close glue application
- Reduced thread tension due to fast closure
Also available as needle seat module.
More Information
Catalogue
H3000 mini module
The smallest module from UES measures only 16x17x45mm but it’s performing great. It is best for fast applications or small places. Glue applicators with this module fit in every - even the smallest - production line.
The mini module is connection compatible to all leading suppliers.
Mini Modules - for Dot-/Beadapplication
- The smallest dimensions for work in the smallest space
- For the fastest applications in narrow production facilities
- Designed to be compatible and appropriate for any production facility
- Special seals and packings for the highest durability with maximum sealing effect
- High-tech materials with the highest surface quality for even higher durability
- Excellent glue hairline tear-off by means of direct closure at the nozzle outlet
- State-of-the-art manufacturing technology
H3000 air/air
- For the fastest applications with the smallest dimensions
- For fast intermittent application of small quantities of glue
- Needle seat module for optimum reduction of nozzle blockages
- Nozzle seat without residual capillary prevents drips
- Minimized thread pulling
- Dimensions (H/W/D) 16*17*54mm
Variant Neddle seat module
- with needle seat for optimum reduction of nozzle blockages
- Dimensions (H/W/D) (16*17*45mm)
More Information
Catalogue
Modules for special applicatons
The modules from UES AG are not only suitable for everyday applications. Our team ensures that every adhesive can be brought into every shape - according to your requirements.
H300 slot nozzle (BS)
The UES high precision module H300 is well suited for standard application of glue at normal application speed. The module processes glue with a viscosity up to 20,000mPas/s at a maximum switching speed of 4,000p/min (depends on the triggering).
For fast openings air pressure is applied to the module .
Slot nozzle modules are designed to fit ideal to the applicator body. Because in most cases several modules are mounted to one body it is necessary to adjust the glue application with each module. The integrated fine adjustment makes it easy to define the glue application of each module separately.
More Information
Catalogue
H300 spray module (SP)
The UES high precision module H300 is well suited for standard application of glue at normal application speed. The module processes glue with a viscosity up to 20,000mPas/s at a maximum switching speed of 4,000p/min (depends on the triggering).
For fast openings air pressure is applied to the module .
The spray module has an additional input for compressed air. Once the air escapes through the symmetrically arranged bore holes constant glue swirling is provided. The modules are used on glue applicators with integrated heat exchanger. The sprayed glue has a sharply edge and is scarcely visible.
More Information
Catalogue
H400 for large glue amounts
With a maximum bore diameter of 3.6mm, the module H400 is particularly suitable for application with a very high glue flow rate.
It is the right choice if you need a large quantity of glue.
More Information
Catalogue